Lessons Learned About

The Importance of Colors of Underground Utility Lines

Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. If there is a need to dig the ground, it is very important that the utility lines first be identified. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. You dont want something disastrous to occur. The worst thing that can happen if lines are not identified is that fatal injuries can happen. It can also interrupt services in your area where the line is located. People can call 811 to prevent these incidents, before they proceed with digging their property. Utility companies can then mark out their respective lines when you call them out.

Marking lines may lessen the risks but there are time when accidents still happen. It is said that every 6 minutes, there is a utility line that is struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. With this machine, companies can easily locate utility lines. Companies can locate their utility lines if any property owner calls 811.

It is easier to identify underground utility lines today because they now use different colors for each utility. Here are the colors used for different utilities.

White lines are for proposed excavation sites. You can mark areas with white lines that will soon be excavated.

Temporary survey markings use pink lines. Legal property boundaries are marked off by these pink lines.

Electric power lines, cable, conduit, and lighting cable use red lines. This color is appropriate for electrical works since it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Lines for potable water use blue lines. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. If you see the color green, then it indicates sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.