Quick Tips to Finding Hidden Piping and Valves
If you are a homeowner then you need to know the details of your home like the back of your hand. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.
There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.
If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. If you find such a piping in your home then you are sure that you have a really high pressure gas system. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.
There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.